Safety Instructions - CLAS B.LINE AC 0550BL Mode D'emploi

HU 0014BL

SAFETY INSTRUCTIONS

1. Maintain this product in good working order and condition, take immediate action to repair
or replace damaged parts.
2. Use only approved parts. Non-approved parts will void the warranty.
3. Keep children and unauthorized persons away from the work area.
4. Keep the work area clean and tidy and keep it free of foreign materials.
5. Ensure that the work area is adequately lit.
6. DO NOT use the kit to perform a task for which it is not designed. DO NOT hold the pump
inlet against the skin during use. DO NOT allow untrained persons to use the kit. DO NOT
use under the influence of drugs, alcohol or intoxicating medications.
7. After use, clean the equipment and store it in a cool, dry, child-safe place.
8. WARNING! Brake fluid will damage the paint. Any spillage must be flushed out immediately
with water. WARNING! Brake fluid is flammable - keep away from sources of ignition,
including hot surfaces such as the exhaust manifold. Dispose of residual fluid in accordance
with local authority regulations. WARNING! DO NOT pollute the environment by allowing
uncontrolled release of fluids.
9 . Always read and observe the warnings on the brake fluid reservoir.
10. Wear eye protection and keep skin contact to a minimum. If brake fluid comes into contact
with the eyes, rinse with plenty of water and consult a doctor. If swallowed, consult a
doctor immediately.
INTRODUCTION AND CONTENTS
This tool helps identify a variety of defects in vehicle systems, including fuel, ignition,
transmission, emissions and air conditioning/heating.
The kit also includes tanks, hoses and adapters for bleeding brake and clutch systems. It
includes a lightweight aluminum body with a simple sliding sleeve for the choice of pressure
or vacuum test and a large, easy-to-read rubber pressure gauge.
Content :
• 1 set of 5 bits
• 1 set 4 pipe extensions + 4 bits
• collection container with 2 lids
• 2 500mm extensions
METAL TRANSFER PUMP