Safety Instructions - CLAS HU 0639N Mode D'emploi

Pompe a huile 3:1 pneumatique+flexible futs 180-220kg
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

HU 0639N
3:1 PNEUMATIC OIL PUMP+FLEXIBLE BARRELS 180-220kg
INTRODUCTION
The HU 0639N pneumatic oil pump has a 3:1 pressure ratio and is very easy to assemble to the oil
drum.
Model
HU 0639N
Pneumatic

SAFETY INSTRUCTIONS

• Before using the pump, it is required to wear the appropriate safety
• Never put the liquid in contact with an exposed part of the body. This could
• Do not exceed the maximum and minimum operating air pressure values of
• CAUTION: Do not exceed the capacity of the drum mentioned in the table
• Use the pump with a pressure regulator
• When the pump is fi nished using, disconnect the air connection and then
• It is important to work in an environmentally friendly way. Therefore, pay
• This product is designed for lubrication work only. Never use it for any other
• Always use original spare parts.
• Do not weld above the drum.
• Be particularly careful when using the pump on a non-fl at surface.
6-8 Bar
3:1
equipment (gloves, goggles, coveralls, shoes, helmets, etc.) and to read the
instructions carefully.
cause serious injury or burns to the skin.
the pump (6-8 Bar)
above.
pull the gun trigger to release the remaining pressure in the pump.
attention to the recycling of used oils. It is mandatory to comply with local
guidelines for the recycling of waste oils.
type of work.
2 - 20 MT
15L
208L
R1 - 3/8" - 1/2"
14x16x117
6.5

Publicité

Table des Matières
loading

Table des Matières