Installing The E-Socket On The Eve Single Pro-Line Fr - alfen E-Socket Guide D'installation Rapide

en
All manuals and user guides at all-guides.com
E-Socket cable
power cable
1 2 3 4 5 6 7
1 2 3 4 5 6 7
1 2 3 4 5
1 2 3 4 5
Installing the E-Socket on the Eve
1 6
Single Pro-line FR
1 Remove the front cover.
•
•
2 Remove the frame and the plug connection.
•
2 3 5
3 Install the Cable gland with the locknut on the
charging station and feed the E-Socket cable
through the E-Socket cable gland.
4 Connect the E-Socket cable.
•
•
4
5
Follow step 2 in reverse order to refit the frame and
plug connection.
•
6 7
6 7
6
Follow step 1 in reverse order to refit the front cover.
•
•
10
These installation instructions are solely
applicable for installing the E-Socket on the Eve
Single Pro-line FR.
When installing the Eve Single Pro-line FR for
the first time follow the instructions described
in the quick installation guide delivered with the
product.
Unscrew the six T20 screws.
Pull the front cover straight upwards.
Unscrew the 3 screws.
Do not damage the power cables. Leave the
frame hanging carefully next to the housing.
Make sure the power cable is not live.
Connect the cores to the terminals.
Tighten the gland.
Ensure the cable is clamped firmly in the gland.
Only then will the IP55 sealing be effective.
Tighten the 3 screws.
Take care not to damage the cables; keep them
clear of the locking mechanisms so they do not
obstruct it.
Place the front cover on the housing.
Tighten the six T20 screws on the back.
Avoid dropping the front cover. Keep hold of
the front cover with one hand.