Suzuki 51800-1381 Serie Instructions D'installation page 3

1. Stick the Cushions B, C, D, E
Installation
to behind the Meter Cover 1.
NOTE:
• Remove the stain from the sticking
part and degrease the Meter Cover
1
.
• Stick the Cushions
with the curved surface end.
• The sticking position of cushion is
symmetrical.
2. Cut a cross in Cushions D and
E to match the holes in Meter
Cover 1.
3. Stick the Rubber Cushion 6 to
behind the Meter Panel 2.
NOTE:
• Remove the stain from the sticking
part and degrease the Meter Panel
2
.
• Stick the Rubber Cushion
according the edge of rib.
4. Install the Clip F to the Meter
Panel 2.
D, E
aligning
Cut a cross
6
GENUINE SUZUKI ACCESSORIES
10mm
15mm
13mm
3mm
Meter cover hole Meter cover hole
Rib Rib
3/5