Overview - Bosch MSM640 Série Mode D'emploi

Do not use the appliance with damp hands and do not operate at
no load. Do not immerse the appliance in the ingredients above
the blender foot-base unit connection point. After each use,
whenever the appliance is unsupervised, prior to assembly, prior
to disassembly, prior to cleaning and in the event of an error, the
appliance must always be disconnected from the mains.
W Warning!
Risk of injury!
Care should be taken when handling sharp cutting blades and
emptying the bowl as well as during cleaning. Immediately after
using the appliance, wait for the blade in the blender foot to come to
a standstill. Prior to replacing accessories or replacement parts that
are moved during operation, the appliance must be switched off and
disconnected from the mains. Do not attach or remove accessories
until the appliance is at a standstill. Never grip the blade in the
blender foot. Never clean the blade in the blender foot with bare
hands. Use a brush.
W Warning!
Risk of scalding!
Take care when processing hot food. Hot food may splash during
processing. Never place blender foot on hot surfaces or use in very
hot food. Leave boiling food to cool down to at least 80°C before
processing. Before using the hand blender in a cooking pot, take
the pot off the hotplate.
W Warning!
Risk of suffocation!
Do not allow children to play with packaging material.
Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our website.
Contents
Intended use . ..............................................8
Safety instructions ......................................8
Overview.....................................................9
Operation . .................................................10
Cleaning ...................................................10
Recipes and tips ....................................... 11
Disposal . ................................................... 11
Guarantee................................................. 11

Overview

Please fold out the illustrated pages.
X Fig. A
1 Base unit
2 Power cord
3 On button
The hand blender remains switched on as
long as an On button (a or b) is pressed.
a Normal speed
b Turbo speed
The turbo speed is used for the uni-
versal cutter (if included in delivery).
4 Release buttons
To remove the blender foot, press both
release buttons at the same time.
Safety instructions en
9