Releasing The Isofix And The Top Tether / Disassembly Of The Heyner; Group Ii + Iii (Starting From 15-36 Kg); Disassembly Of The Fi Ve-Point Belt System (G) Of The Seat - Heyner MultiRelax AERO Fix Guide D'utilisation

English
1.4.2 Sitting and lying positions of the child
The HEYNER® child car seats are equipped with an ad-
aptation mechanism. The handling is simple and fast and
it is possible with only one hand.
By turning the position adjuster (PG) you move the
backrest (N) to the desired position.
1.5 Releasing the ISOFIX and the top tether /
disassembly of the HEYNER®
Take care that the seat is not in the lying position.
Relieve the top tether (TT) by pressing the unlock button
and relieve it from the anchorage point of the vehicle.
Lay the top tether (TT) across the child car seat.
In order to loosen the ISOFIX arms (IM), slightly press
the HEYNER® MultiRelax AERO Fix into the car seat
und and loosen the ISOFIX clips (IK) by pressing the
ISOFIX adjustment button (IE).
Now pull the whole seat forward until the ISOFIX arms
(IM) are
completely moved out and until you can see the green
marks.
Now you can press the ISOFIX release button (IT) at the
29
ISOFIX clips (IK), in order to release them from the ISOFIX
Press
anchors (IA).
Pull the HEYNER® MultiRelax AERO Fix forward and
press again the ISOFIX adjustment buttons (IE), in order
Open
to push both ISOFIX clips (IK) into the base part (BT) of
the seat.

2. Group II + III (starting from 15-36 kg)

2.1 Disassembly of the fi ve-point belt system (G) of the
seat
Loosen the shoulder belts by pressing the belt adjuster
(GV) and pull the harness belts (G2) towards you.
Do not tear at the shoulder pads.
Pull
Release the belt ends of the harness belt (G2) on the
reverse side
of the seat part (ST) from the belt anchor (R).
English
GB
L+R
30