Heyner MultiRelax AERO Fix Guide D'utilisation page 15

English
the ISOFIX arms (IM) before you connect them. You can
do this by pulling back the ISOFIX release button (IT)
until a <<click>> sound is clearly heard.
1.3.2. Installation and attachment on the car seat
with ISOFIX and top tether (TT)
Press the ISOFIX adjustment button (IE) and tear out
the ISOFIX arms (IM) at both sides as far as possible.
Now release the ISOFIX adjustment button (IE) and
make sure that that both clips do not slip back.
Now guide both ISOFIX clips (IK) to the ISOFIX
anchors (IA) on the car and let each one lock in
place until a <<click>> sound is clearly heard.
Please check by means of the safety indicators on
BOTH SIDES, if the seat is connected correctly with
both ISOFIX anchors (IA) of the car.
GREEN: The clip is fi xed CORRECTLY.
25
RED: The clip is
correct!
Only a correct fi xation OF BOTH CLIPS ensures the
intended hold of the seat and the protection of your
child in the vehicle!!!
Press the seat as far as possible against the backrest
of the vehicle.
Let the ISOFIX arms (IM) lock in place until a <<click>>
sound is clearly heard.
Now take the top tether (TT) and guide it along under the
headrest of the vehicle to the appropriate top tether
anchorage point of the vehicle.
This one you can fi nd by means of the instruction manual
of your car. Hook on the top tether and pull the belt tight.
Please check again, if the seat is fi rmly attached on the
seat.
L+R
CHECK
NOT FIXED CORRECTLY, please
English
L+R
GB
A
B
C
26