The Child In The Heyner® Multirelax Aero Fix; Securing The Child - Heyner MultiRelax AERO Fix Guide D'utilisation

English
ATTENTION:
If the top tether (TT) was attached correctly, there appe-
ars a green mark on the safety button.
CAUTION!
Please make sure that you do not use the carry hook
instead of the top tether anchorage point.
Search for this symbol on your vehicle:
Only if the HEYNER® MultiRelax AERO Fix is correctly
installed in the
car seat with the ISOFIX anchors (IA) and the top tether
(TT), the seat can optimally protect the child.
1.4 The child in the HEYNER® MultiRelax AERO Fix

1.4.1 Securing the child

Loosen the shoulder belts by pressing the belt adjuster (GV) and pull the har-
ness belts (G2) towards you.
ATTENTION:
Do not tear at the shoulder pads.
27
Open the belt buckle (D) and the belt system (G).
Put the harness belts (G2) to the left and to the right
side.
Now place the child into the sitting surface of the
HEYNER® MultiRelax AERO Fix so that the buttocks is
right down
in the seat recess.
Bring together both belt tongues (C) of the harness belt
(G2) and connect them with the belt buckle (D) until a
<<click>> sound is clearly heard.
By tearing at the central adjustment belt (G5) make sure
that the harness belts (G2) lie fl at and tight against the
child's body and that they are not twisted.
In winters especially avoid thick clothing under the belt.
IMPORTANT:
Make sure that the belt strap of the three-point belt is
neither twisted nor jammed. Also check the lap belts.
They must not be twisted and should run as low as
possible across the hips of the child.
Please strictly follow the drawings and the installation
instructions. Should you have any questions, please
contact your dealer, the importer or the manufacturer.
English
GB
Press
Press
Open
28