Preparing The Product For Use; Operation; Cleaning And Care; Disposal - Auriol HG09063A Instructions D'utilisation Et Consignes De Sécurité

Risk of damage of the product
Only use the specified type of battery / rechargeable battery!
Insert batteries / rechargeable batteries according to polarity marks (+) and (—) on
the battery / rechargeable battery and the product.
Use a dry lint-free cloth or cotton swab to clean the contacts on the battery /
rechargeable battery and in the battery compartment before inserting!
Remove exhausted batteries / rechargeable batteries from the product immediately.
˜ Preparing the product for use
Remove the battery from the box and the wrapper.
Insert the battery with the + contact first, and then push down the – contact.
Replacing the battery: see fig. B.
˜ Operation
Setting the time
To set the time, turn the small wheel 2 until the hands are in the desired positions
(see fig. B).
˜ Cleaning and care
The product should only be cleaned on the outside with a soft dry cloth.
If the wall clock is not going to be used, remove the battery.
˜ Disposal
The packaging is made entirely of recyclable materials, which you may dispose of at
local recycling facilities.
Observe the marking of the packaging materials for waste separation, which
are marked with abbreviations (a) and numbers (b) with following meaning:
1 – 7: plastics / 20 – 22: paper and fibreboard / 80 – 98: composite
materials.
GB/IE 17