Operating Instructions; Location And Function Of Controls - LG Goldstar WL Série Manuel D'utilisation

Operating Instructions

Location and Function of Controls

Function of Controls
The controls will look like following picture.
OPERATION
High Cool, Med Cool and Low Cool provide cooling with different fan speeds. Med Fan or Low
Fan provides air circulation and filtering without cooling. Off turns the air conditioner off.
NOTICE
: If you move the switch from a cool setting to off or to a fan setting, wait at least 3 minutes
before switching back to a cool setting.
Cooling Descriptions
For Normal Cooling- Select High Cool or Med Cool with the Operation knob at the midpoint of
Thermostat knob.
For Maximum Cooling- Select High Cool with the Operation knob at the highest number
available on your Thermostat knob.
For Quieter & Nighttime Cooling- Select Low Cool with the Operation knob at the midpoint of
Thermostat knob.
THERMOSTAT
The THERMOSTAT is used to maintain the room temperature. The compressor will cycle on
and off to keep the room at the same level of comfort. When you turn the knob to a higher
number(the right side) and the indoor air will become cooler.
The 5 or 6 position (the middle position of arc) is a normal setting for average conditions.
CAUTION
: When the air conditioner has been performed its cooling operation and is turned off or set to
the fan position, wait at least 3 minutes before resetting to the cooling operation again.
8 Room Air Conditioner
THERMOSTAT
OFF
MED HIGH
FAN COOL
LOW
MED
FAN
COOL
LOW COOL
OPERATION