Image Menu; Audio Menu - Tele System Palco LED08 Manuel De L'utilisateur

ENGLISH
Keyboard lock: Once enabled, the user can interact with the TV only via the supplied
remote control.
New Password: Allows you to change the default password.
Clear Lock: removes all user-set blocks.
Hotel setting mode: Activates the Hotel function, which enables the user to customize
the menu and some functions authorizing access by password.
ATTENTION!
Write down and preserve the new PIN code in a safe place. In the event that you forget
the password, use the universal code "4711", which will grant you access to the
Password menu, and allow you to set a new password.

11 Image Menu

From this menu you can adjust the Brightnees, Contrast and Sharpness levels.
Picture Mode: You can select one of the default settings, which are not adjustable
(Dynamic Standard or Soft) or the "Custom" option which allow you to regulate the
mentioned levels above.
Color Temperature: This function allows you to adjust the intensity of the color of the
image
Aspect Ratio: Allows you to change the screen aspect ratio, the available options are:
Auto, Full (16: 9), Zoom1, Zoom2 and 4: 3
Advanced settings: in the submenu, Noise Reduction (NR), MPEG NR and Dynamic
Contrast settings are available; using these functions, you can reduce interference and
noise formed in the picture.

12 Audio Menu

From this menu you can adjust the TREBLE, BASS, and Sound BALANCE audio levels.
Sound Mode: You can select one of the default settings, not adjustable (Standard, Music,
Movie) or the User option; that allows the settings of Treble and Bass.
Balance: You can adjust the volume from the left/right speakers, giving precedence to
one another.
Surround sound: turn on or off the Surround mode
Auto Volume (AVL): If set to ON, it memorizes the audio levels after powering down and
plays them again when you turn the device on.
SPDIF: Defines the audio output mode from "Coaxial" connector. OFF = always off, PCM
= stereo and AUTO = keeps the original format of the audio signal.
17