Calibration - Kerbl DigiScale 1000 Guide D'utilisation

Zero-tracking range &
display speed
Parameter changing
Stable effect
Parameter changing
Unit
Parameter changing
Turn off method
Parameter changing

10. Calibration

Item
First load
Input weight, e.g. 1000kg
Hanging weight, waiting
stable
Second load
Input weight, e.g. 300kg
Third load
Input weight, e.g. 500kg
**: zero-tracking, 0-5, 0=0d, 1=0.5d, 2=1d, 3=1.5d, 4=2d, 5=2.5d; **:
TARE
display speed, 0-2, 0=slow, 1=average, 2=fast
0 Parameter set in factory
TARE 0-2, 0: minimum, 1: average, 2: maximum
0 Parameter set in factory
TARE 0-2, 0=kg, 1=lb, 2=other
0 Parameter set in factory, kg
0-2, 0=turn off manually, 1=stable, after 15 minutes,
TARE scale display ( - ), 3= stable, after 15 minutes, scale display ( - ) ,after
60 minutes, turn off automatically.
0 Parameter set in factory
MR Parameter setting finished
Operation Setting range & explain
First: Press F2, than adde F1
F2 + F1
Please hold both keys for 5 seconds, that the display shows
TARE Choose the position of the cursor
0 Choose the value
Enter the password
MR Calibration ok
MR Start first load point calibration
MR Last calibration value or default value
TARE Choose the position of the cursor
0 Choose the value
0 for example no decimal place
MR First load calibration ok
MR Start second load point calibration
MR Last calibration value or default value
TARE Choose the position of the cursor
0 Choose the value
MR Second load calibration ok
MR Start third load point calibration
MR Last calibration value or default value
TARE Choose the position of the cursor
28
Cd=**
Cd=21
LL= *
LL= 1
Un= *
Un= 0
oFF=*
oFF=1
End
Display
P----
P8416
-----
LoAd1
*****
1000
PT= 0
-----
LoAd2
*****
0300
-----
LoAd3
*****