Kerbl DigiScale 1000 Guide D'utilisation page 26

• ZERO
Operation Illustration
ZERO set 0 when empty load
• HOLD
Operation
HOLD Hold the weight, "HOLD" lights on. Press it again to resume.
• Tare directly
Operation Illustration
TARE "TARE" lights on, net weight displays .Press again to show gross weight.
• Set tare
Operation
MR TARE
M+ TARE
ZERO CLEAR
MR
• Accumulation
Operation Display
M+ No***
H****
L****
Attention:
1. Accumulation value will display twice before the scale automatically return normal mode. Pressing MR also turn the
scale back to normal mode.
2. Total accumulation = HXXXX+ LXXXX (E.g. H2244 + L5566 =22445566)
• Query
Operation Display
MR M+ No***
MR M+ No***
MR M+ L***
MR M+ H***
Attention:
Press TARE ZERO to query weight and accumulation value.
Press MR to exit.
Illustration
Illustration
Display current tare weight
Move cursor position
Input tare
Exit, "TARE" lights on, Display weight without tare upon weighing
Illustration
Current accumulation times
High 4- digitals of current accumulation value
LOW 4- digitals of current accumulation value
Illustration
Current accumulation times
Current weight
Low 4-digitals of accumulation value
High 4-digitals of accumulation value
26