Parameter Setting - Kerbl DigiScale 1000 Guide D'utilisation

• CLEAR
Operation Display
CLEAR CLr
CLEAR noCLr
• ZERO DISPLAY
Operation
MR ZERO
• Overload Query
Operation
MR CLEAR
• Voltage Display
Operation
MR F1
• Power off
Operation
OFF

9. Parameter setting

Item
Capacity
Parameter changing
Division
Parameter changing
Decimal position
Parameter changing
Zero-setting manually
&automatically
Parameter changing
Illustration
Confirm deletion of accumulation value.
Cancel deletion
Illustration
Display current zero value
Display
SHIFT
Illustration
Display current battery voltage
Display
OFF
Operation Setting range & explain
First: Press F2, than adde F1
F2 + F1
Please hold both keys for 5 seconds, that the display shows
TARE Choose the position of the cursor
0 Choose the value
Enter the password
MR Enter parameter setting
MR Display 02/03/05/10/15/20/30/50/75 circularly
0 e.g. choose capacity 5000kg
TARE Display 01/02/05/10/20 circularly
0 e.g. choose 2kg as division
TARE 0=no, 1=X.X, 2=X.XX, 3=X.XXX
0 e.g. no decimal position
**: manual zero range, **: automatically zero range. 0-4, 0=0%F.S.,
TARE
1=2%F.S., 2=4%F.S., 3=20%F.S., 4=100%F.S.
0 Parameter set in factory, 4%F.S.
Illustration
Display overload times
Illustration
Display current battery voltage and power off.
27
Display
P----
P 0258
SETUP
FS=**
FS=05
1d=**
1d=02
PT= *
PT= 0
Ab=**
Ab=22