Special Instructions; Technical Specifications - Husqvarna TS 66 R Manuel D'utilisation Et D'entretien

This symbol indicates that the machine is
in conformance with the applicable
European directive.

SPECIAL INSTRUCTIONS

The disc cutter is designed to provide safe and
reliable service in operating conditions corresponding
with the instructions, but it can present dangers for the
user and risks of damage, consequently regular on
site inspection is necessary to ensure :
• Perfect technical condition (use for the purpose
for which it is intended and taking into account any
risks, and correction of any malfunction detrimen-
tal to safety).
• Use of a diamond disc for water lubricated cutting
of marble, stone, granite, brick and facings (por-
celain, glazed tiles, ceramics, etc). The use of any
other disc is forbidden (abrasive, saw, etc).
• Competent personnel (qualifications, age, trai-
ning, education) who have studied the manual in
detail before starting work: any fault of an electri-
cal or other nature must be checked by a compe-
tent person (electrician, maintenance foreman,
authorized dealer, etc).
• That the warnings and instructions marked on the
machine are followed (adequate personal protec-
tion, correct use, general safety instructions, etc).
• That no modification, transformation or addition is
detrimental to safety and that it is carried out
without prior authorization from the manufacturer.
• Respect of the maintenance intervals and periodi-
cal checks recommended.
• That only genuine spare parts are used for
repairs.
Instruction plate
MANUFACTURER
TYPE TYPE
WEIGHT
MASSE UTILE
MAXI TOOL Ø MAXI OUTIL
Ø ALESAGE
BORE
SPEED
T/MN - RPM
1 Use
• Use : Sawing porcelain, glazed tiles, ceramics,
etc...
• Tools : Water lubricated diamond
disc diameter 200 mm - bore 25.4
mm (AL).
(Information from your usual
Diamant Boart supplier).
20
N° SERIE SERIAL
FABRICATION
ANNEE DE
FABRICATION
YEAR
POWER
K g PUISSANCE kW
PLAGE DE
m m V VOLTAGE
TENSION
m m FREQUENCE Hz
FREQUENCY
INTENSITY
INT. UTIL. A
Carborundum
disc
Do not use the saw for any purpose for which it
is not designed (using a saw blade or abrasive
disk which do not conform to the instructions
for use).
2

Technical specifications

VOLTAGE
POWER
0,8 kW (1 CV) 230 V 50 Hz
• Motor speed : 2800 rpm
• Disc speed : 2800 rpm
• Electrical protection : IP 54
90°
45°
E
E
L
• Depth of cut (E) :
- at 90° : 40 mm
• Length of cut (L) :
- 660 mm - thickness 10 mm
• Useful width (w) : unlimited
• Dimensions (mm) L x W x H :
900 x 465 x 510
• Unladen weight : 29,5 kg
• Disc cooling by water spray into the disc casing.
• Minimum tank capacity :
- 15 l
• Water pump : adjustable flow
• Electricity supply :
- 230 V : H07-RNF 3 x 1
POWER
MODEL
LEVEL
Depending Lwa (dB)
on model EN ISO 3744
1 KW - 230 v 70
Saw blade
CURRENT
± 5 %
4,5 A
TP
l
2 - L 2 m
PRESSURE VIBRATION
LEVEL LEVEL
Lpa (dB) G 89/392/CEE
ISO 4872 and 91/368/CE
63
P