Ryobi RCS1835 Manuel D'utilisation page 14

GB
F D E I
b) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use. Many Accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
Maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc.
In accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
SERVICE
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
Other general warnings
Know your power tool. Read owners manual
■
carefully. Learn its applications and limitations as well
as the specific potential hazards related to this tool.
Use right tool. Do not force small tool or attachment
■
to do the job of a heavy duty tool. Do not use tool for
purposes not intended.
Protect your lungs. Wear a dust mask if operation is
■
dusty .
Do not operate in poor lighting. Use the unit only in
■
daylight or good artificial light.
Pull the plug immediately if the mains or extension
■
lead is damaged or severed.
Stay alert and exercise control. Watch what you are
■
doing and use common sense. Do not operate tool
All manuals and user guides at all-guides.com
P NL S DK N FIN GR HU
English
CZ RU RO PL SLO HR TR EST LT
when you are tried. Do not rush operation of tool.
Check damaged parts. Before further use of the tool,
■
a guard of any other part that is damaged should be
carefully checked to determine that is will operate
properly and perform its intend function. Check for
alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other conditions
that may affect its operation. A guard or any other
part that is damaged should be properly repaired or
replaced by an authorised service center.
Do not use tool if switch does not turn it on and
■
off. Have defective switches replaced by authorised
service center.
Do not operate this tool while under the influence
■
of drugs, alcohol or any medication.
The appliance is not intended for use by young or
■
infirm persons.
Young children should be supervised to ensure that
■
they do not play with the appliance.
The use of an earth-leakage circuit breaker of
■
residual current device in conjunction with this tool
is recommended.
Maintain the chain saw with care. Keep the cord
■
clear of the chain at all time. Never carry the saw by
the cord or pull on the cord to disconnect it from the
socket.
Chain tension. Make sure that the chain tension is
■
correct, as specified in these instructions. Incorrect
tension may cause the chain to disengage from the
guide bar, which is extremely dangerous.
Extension cord. When an extension cord is used
■
make sure:
(a) That pins on the plug of the extension cord are the
same in number, size and shape as those of the plug
on the saw.
(b) That extension cord is properly wired and in good
electrical condition.
(c) That the wire size is large enough for the AC ampere
rating of the chain saw.
CHAIN SAW SAFETY WARNINGS-SPECIAL
SAFETY INTRUCTIONS
Keep all parts of the body away from the saw chain
■
when the chain saw is operating. Before you start
the chain saw, make sure the saw chain is not
contacting anything. A moment of inattention while
operating chain saws may cause entanglement of
your clothing or body with the saw chain.
Always hold the chain saw with your right hand
■
on the rear handle and your left hand on the front
12
LV SK BG