CLAS M5-M12 Mode D'emploi page 5

OM 0450
M5-M12 INSERT SET
Pièce Description
1 Twist 5.2mm
2 Screw Tap M5x0.8
3 Installation Tool
4 Breaking Pin Tool
5 Twist Drill 6.3mm
6 Screw Tap M6x1.0
7 Installation Tool
8 Breaking Pin Tool
9 Twist Drill 8.3mm
10 Screw Tap M8x1.25
11 Installation Tool
12 Breaking Pin Tool
13 Twist Drill10.5mm
INSTRUCTIONS
1. Drill out the damaged
thread using the
correctly sized twist
drill bit provided.
4. Insert the threaded
insert into the threaded
hole using the
installation tool
All manuals and user guides at all-guides.com
Pièce Description
14 Screw Tap M10x1.5
15 Installation Tools
16 Breaking Pin Tool
17 Twist Drill 12.5mm
18 Screw Tap M12x1.75
19 Installation Tool
20 Breaking Pin Tool
Thread Insert 5mm
Thread Insert 6mm
Thread Insert 8mm
Thread Insert 10mm
Thread Insert 12mm
2. Tap drilled hole using
screw tap provided.
5. Use the breaking pin
tool and hit a sharp
blow to break the rod
of the insert.
3. Load thread insert
into installation tools.
6. Thread is repaired
and ready to use.