Sauder 403932 Instructions De Montage page 27

Step 23
Push the RUBBER SLEEVES (TT) over the METAL PINS (SS).
å
Insert the METAL PINS into the hole locations of your choice in
the ENDS (A, B, C, and D) and UPRIGHTS (E, F, G, and H). Set
the ADJUSTABLE SHELVES (T, U, and V) onto the METAL PINS.
Push a CAM COVER (PP) onto each HIDDEN CAM.
å
Apply the WARNING LABEL (UU) to the SHELF (L). You
å
should be able to read the label when the TV is removed
from the unit. When the TV is in place, it should hide the
label. Peel off the backing and apply the label as shown in
the diagram.
NOTE: This is a permanent label intended to last for the
å
life of the product. Once applied, do not try to remove it.
To cover HIDDEN CAMS
PP
(6 used)
www.sauder.com/services
V
V
E
D
B
U
G
SS
(28 used)
TT
Never use this furniture with a TV that is too
large or too heavy. Severe injury or death can
occur. The TV and furniture will be unstable
and may tip.
- The TV must weigh less than 95 lbs.
- The base of the TV must be able to sit
completely on this shelf.
UU
L
T
H
H
F
403932
Almost time to
celebrate! With a nap.
WARNING
V
C
V
E
U
A
Page 27