Safran Legent T Manuel D'utilisation Et De Maintenance page 26

Table des Matières

Publicité

La fixation de la bouclette double est réalisée avec
la rondelle métallique possédant trois trous fournie
avec votre sac-harnais ou l'appareil.
The fixing of the loop must be made with the
metallic washer provided with your harness
container or AAD type.
A) Faire un tracé à la longueur correspondant au
type de voilure à plier, puis effectuer le nœud et le
bloquer sur le tracé.
Mark the right lenght for the canopy to be packed,
then make the knot and tight it on the mark.
B) Effectuer un second nœud et le bloquer sur le
premier.
Make a second knot and tight it on the first one.
C) A l'aide d'un fil, passer la bouclette double dans le
premier trou et poursuivre en passant le fil dans les
second et troisièmes trous tel qu'indiqué.
Attach a thread on the loop, then route it through
the second and third hole as it is shown.
D) Tirer la bouclette double en vérifiant que les deux
bouclettes sont bien d'une longueur identique, puis
et retirer le fil.
Pull on the loop and put the thread away.
E) Glisser un axe (crayon) dans les deux bouclettes,
puis effectuer une traction en ajustant la marque et
la rondelle.
Insert an axis (pencil) into the eye of the loop, lock
the free strand, then pull on wile adjusting the mark
and the washer.
RAPPEL IMPERATIF:
Ne pas effectuer de nœud de bloquage
différents de ceux expliqués ci-contre.
IMPERATIVE RECALL:
DO NOT MAKE any others knots than those
which are shnown here against.
Lire, suivre, appliquer les AVERTISSEMENTS, RECOMMANDATIONS, ET INSTRUCTIONS de ce manuel /
Read and follow all WARNINGS, WARRANTY, INSTRUCTIONS for products of this manual.
20/65
CMM 25-63-68 Manuel d'utilisation et de maintenance LEGEND T
CMM 25-63-68 Use and maitain manual LEGEND T
A
A
B
B
C
C
C
D
E
SAFRAN ELECTRONICS & DEFENSE
Ed 17 - Décembre 2020
Tracé-Mark

Publicité

Table des Matières
loading

Produits Connexes pour Safran Legent T

Table des Matières