Passer le tube de connection du palpeur dans
le fourreau prévu à cet effet et refermer le
velcro.
Place the air hose, connecting the main body
with altitude box, in the tunnel over the shoul-
der and close the velcro.
Ouvrir le plastron situé du coté droit sous la
poignée de libérateur, puis à l'aide des deux
vis fixer le palpeur sur la patte en sangle.
Open the flap under the cutaway handle
and install the altitude box on the webbing,
securing with two screws.
Lire, suivre, appliquer les AVERTISSEMENTS, RECOMMANDATIONS, ET INSTRUCTIONS de ce manuel /
Read and follow all WARNINGS, WARRANTY, INSTRUCTIONS for products of this manual.
12/65
CMM 25-63-68 Manuel d'utilisation et de maintenance LEGEND T
CMM 25-63-68 Use and maitain manual LEGEND T
SAFRAN ELECTRONICS & DEFENSE
Ed 17 - Décembre 2020