Tecno-gaz europa B pro Mode D'emploi page 54

ENGLISH
POWER SUPPLY CORD
Take the power supply cord provided (pos.B) and insert the female plug (FIG.A–pos.05)
in the socket of the back panel of the autoclave then insert the male plug (pos.A) in the
electric plug of the system.
Picture
Envelope standard
Codee
MEMORY CARD
To be used to memorize the autoclave cycles (for the best compatibility with the device, it
is advisable to always use the original memory card).
WARNING: The card contains the software reading log cycle - Carry out the rescue
and installed on the PC before the commissioning of the autoclave (see par.12)
Picture
Envelope standard
Code
12
Fig.13
1
CECG006
Fig.14
1
CEGS001