Speedboost ® Function; Panel Lock; Wipe Protection; Automatic Time Limitation - Bosch NET8068SUC Manuel D'utilisation Et D'entretien

SpeedBoost function
®
This function enables you to heat up large quantities of
water faster than when using heat setting
To see which element is equipped with this feature check
the cooktop for the printings boost
For dual elements, the outer ring has to be activated in
order to use this function.
Setting the SpeedBoost
Select the element with the SpeedBoost
1.
Touch the Boost key. A signal sounds and
G
2.
up in the display.
The function is activated.
Cancelling the SpeedBoost
Select the element with the SpeedBoost
1.
Touch the Boost key. A signal sounds and the
G
2.
indicator goes out. The element switches to heat
›
level .
Š
You can also cancel the function by setting a heat
level for ongoing cooking. A signal sounds and the
indicator goes out. The element switches to the set
›
heat level.
The function is deactivated.
Note: The duration of the SpeedBoost
restricted. After 20 minutes the element will switch
automatically to heat level
WARNING
9
RISK OF FIRE
Oil and fat heat up quickly with the SpeedBoost
function. Overheated oil or fat may ignite, never
leave the cooktop unattended while cooking with
the SpeedBoost function.
®

Panel lock

You can use the panel lock to prevent children from
accidentally turning the cooktop on.
Turning the child lock on
The cooktop must be turned off.
Touch Clean Lock/Child Lock for 4 seconds. The
indicator lights up for several seconds. The cooktop is
Ú
now locked.
Turning the child lock off
Touch Clean Lock/Child Lock for 4 seconds. The
cooktop is now unlocked.
CAUTION
9
The child lock may be accidentally turned on and off
due to:
water spilled during cleaning
▯
food that has overflowed
▯
objects being placed on the Clean Lock/
▯
Child Lock touch key.
.
Š
.
G
function
®
function.
®
›
function
®
function.
®
function is
®
.
Š
Automatic panel lock
With this function, the panel lock is automatically
activated whenever you switch off the cooktop.
Turning on and off
See "Basic settings" section.

Wipe Protection

Cleaning the control panel while the cooktop is on may
change the settings. In order to avoid this the cooktop
has a wipe protection function.
lights
To activate:
Touch the Clean Lock/Child Lock key. The
above the key lights up. The control panel is locked for
35 seconds.
You can now clean the surface of the control panel
without risk of changing the settings.
To deactivate:
To deactivate the function before the time has elapsed,
touch the Clean Lock/Child Lock key. The
above the key turns off, the function is deactivated.
Notes
An acoustic signal sounds 30 seconds after activation.
▯
This indicates that the function is about to finish.
The wipe protection lock does not lock the main
▯
switch. The cooktop can be switched off at any time.

Automatic time limitation

If the element is used for prolonged periods of time
without changes in the settings being made, the
®
automatic time limitation function is triggered.
The element stops heating.
indicator /
• œ
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated depends
on the selected heat level (from 1 to 10 hours).
"‰ and the residual heat
flash alternately in the display.
indicator
Ú
indicator
Ú
13