LINE INPUT (8)
Connect an AUX source to the AUX input (8) on the rear panel and press the input selector button (9) on
the rear panel until LINE is displayed.
VIDEO OUT (7)
Connect an RCA video lead to this socket and to the RCA input socket of your TV set, video projector, etc.
BLUETOOTH OPERATION
1. Turn on the unit and press the input selector button on the unit to select the Bluetooth function.
2. Activate the Bluetooth feature on the external device to be paired.
3. Initiate a search for devices. The device shows up as "BT SPEAKER".
4. Press the button to start playing and the buttons and for the selection of songs.
Trouble shooting
If a problem occurs, follow the steps in the table below. If problem still can't be solved, please contact your
retailer.
Problem
No sound when power
on
No sound from the
microphone
No sound after
inserting USB/TF card
If Speaker makes loud
noises
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed.
©Copyright LOTRONIC 2019
Possible cause
1. No input source
2. Volume down
1. Bad mic connection
2. Mic not switched on
3. Mic volume down
1. Incorrect file format
2. Bad connection of USB/TF card
3. The USB/TF is plugged into the
front-mounted inputs
1. Microphone switched on but
may be too close to the speaker
2. Microphone switched on but is not
being used.
3. Microphone volume may be too
loud
4. Mobile phone is being used too
close to the speaker
5. Other wireless equipment may be
placed very close to the speaker.
PORT-TFT12
Solution
1. Connect an AUX signal, USB, TF
or Bluetooth source
2. Adjust volume
1. Plug in the mic properly
2. Switch mic on
3. Increase mic volume
1. File format should be MP3
2. Plug in USB/TF card properly
3. Switch on the MP5 POWER
switch on the rear panel
1. Keep the microphone 2
meters away from the speaker
2. Turn off microphone if not in
use.
3. Adjust microphone
volume to lower mode
4. Keep mobile away from the
speaker whilst attending a call.
5. Keep the speaker away from
other wireless equipment
7