Braun 1 Serie Mode D'emploi page 7

English
Our products are designed to meet the highest standards of quality, functionality
and design. We hope you enjoy your new Braun Shaver.
Warning
Your shaver is provided with a special cord set, which has an integrated Safety
Extra Low Voltage power supply. Do not exchange or tamper with any part of it,
otherwise there is risk of electric shock.
Never use the appliance with a damaged foil or cord.
This appliance is not intended for use by children or persons with reduced
physical, sensory or mental capabilities, unless they are given supervision by a
person responsible for their safety. In general, we recommend that you keep the
appliance out of reach of children. Children should be supervised to ensure that
they do not play with the appliance.
Oil bottle
Keep out of reach of children. Do not swallow. Do not apply to eyes. Dispose of
properly when empty.
Description
1 Foil protection cap
2 Shaver foil
3 Cutter block
4 Long hair trimmer
5 On switch
6 Off switch
7 Power LED (model 150s only)
8 Shaver power socket
9 Special cord set
Charging
(model 150s only)
The best environmental temperature for charging is between 5 °C and 35 °C.
Do not expose the shaver to temperatures higher than 50 °C for extended periods
of time.
• Using the special cord set (9) connect the shaver to an electrical outlet with the
motor switched off because the battery won't charge unless the shaver is
switched off.
• To make sure that the shaver is switched off, press the off switch (6) before you
start charging.
• When charging for the first time, leave the shaver to charge continuously for
16 hours.
• The power LED (7) indicates that the shaver is connected to an electrical outlet.
• Subsequent charges will take about 8 hours.
7