Robot Coupe Blixer 23 Mode D'emploi page 14

• VERTICAL CUTTER MIXERS ONLY
• 2-BLADE ASSEMBLY :
We recommend you use the 2-blade assembly for processing small quan-
tities of up to half the maximum limit indicated (see page 9), with the
exception of liquid or blended preparations.
Correct positioning of
2-blade assembly (top view)
Position 1
POSITION 1 :
With spacer between lower blade and blade shaft.
• For coarse chopping.
FITTING :
• Fit the blades and spacers so that they are the right distance apart,
according to the :
- type
- weight and
- volume of the foodstuffs to be processed.
Screw nut Wide spacer
12
180°
Position 2
Narrow spacer
• 3-BLADE ASSEMBLY :
We recommend you use the 3-blade assembly for processing large quantities of more
than half the maximum limit indicated, with the exception of liquid or blended prepa-
rations for which we strongly recommend you use the 2-blade assembly.
To obtain the best possible results with these types of preparation, we recommend
you use the lower speed (1500 rpm) only.
Position 1
POSITION 2 :
No spacer between lower blade and blade shaft.
DISMANTLING :
Locking spacer Blade
Correct positioning of
3-blade assembly (top view)
120°
120°
• For fine chopping and emulsions.
• For grinding and kneading.
• Unscrew the screw nut
• Remove the spacers.
Blade shaft
Position 2