Beko CEG5331X Mode D'emploi page 37

6
Troubleshooting
Problem
Milk spray out the table
Descaling indicator keep flash-
ing even after the descaling
process
The appliance no longer per-
forms the rinsing cycle when
switched on or off.
Fully Automatic Coffee Machine / User Manual
Cause
Milk dispensing tube is not put
in place
Decaling process is not com-
pleted
Improper handling when ser-
vicing the appliance may be
the cause.
Solution
Milk foam spray out from dis-
penser
Please be patient and wait for
the process finish. The ma-
chine will auto shut off auto-
matically , don't switch off the
machine manually
1. When the appliance is on,
remove the coffee group ac-
cess door.
2. Press and hold the on/off
button until you hear 2 beeps.
3. Replace the coffee group ac-
cess door.
37 / EN