Publicité
Les langues disponibles
Les langues disponibles
5
Cleaning
5.3 Empty System Function
The empty system function is recommended to be used before long period
of non-use, frost protection and before talking to repair agent.
1. In standby condition, press and hold the
together for 5 seconds.
2.
will then be flashing.
3. Remove the water tank from the appliance.
cates that the empty system is under process. You can press
removing the water tank to resume back to the standby condition.
4. When the empty system function is completed, the appliance will
switch off automatically.
WARNING: After perform EMPTY SYSYEM FUNCTION; press
the hot water button until water can come out from spout
when the coffee maker is reused again.
5.4 Manual Rinsing
You can perform a manual rinsing cycle to clean the coffee nozzle after
use. It is also suggested to perform a manual rinsing if the appliance has
not been used for a long period of time.
1. In standby condition, press and hold the
together.
2.
will flashing. The coffee nozzle will then dispense a small amount
of water which is used for the
32 / EN
and
will light up stably indi-
and hot water button
rinising.
Fully Automatic Coffee Machine / User Manual
Espresso button
before
Publicité
