Publicité
Les langues disponibles
Les langues disponibles
3
Preparation
3.1 Installation
Remove any protective films, stickers and any other packing
material on the appliance.
3.2 Filling the water tank
About the protect program: If the water tank is not
fully placed into the machine, a protection mode will be acti-
vated in 15 seconds during brewing process. Hot water button
will lights on control panel.
1. Make sure that the water tank is fully inserted into the ma-
chine.
2. Press the hot water button. After the hot water is dis-
pensed, the machine will be in standby condition.
WARNING: When
water level and requires filling the water tank.
To prevent overflow of water from the water tank, do not add
water directly into the appliance with another container.
WARNING: Never fill the water tank with warm, hot, spar-
kling water or any other liquid which might damage the water
tank and the machine.
26 / EN
is flashing, the water tank is in low
Fully Automatic Coffee Machine / User Manual
Publicité
