Beko CEG5331X Mode D'emploi page 29

4
Operation
The pre-brewing function moistens the grounded beans in the
brewer with a small amount of water before full extraction. This
expands the coffee grounds to build up a greater pressure in the
brewer which help extraction of all the oils and full flavor from
the grounded beans.
1. When the machine is in standby condition, press and holds the
5 seconds.
2. The will then be flashing and the following button will have the fol-
lowing indications for different settings:
In ECO Mode
In Speed Mode
In Default Setting
3. Press the Cappuccino button for ECO mode, Latte button for speed
mode and Espresso button for default setting.Two Beep sound will
be heard indicates that the mode is being selected. (Note: If you are
pressing the relative lights on button for each mode, the machine will
not response).
4. If you would like to remain the setting unchanged, press
wait for 5 seconds for the machine to return to the standby condition
Fully Automatic Coffee Machine / User Manual
Cappuccino button
Lights ON
Flashing
Flashing
Latte button
Flashing
Lights On
Flashing
for
Espresso button
Flashing
Flashing
Lights On
again or
29 / EN