Coin Pulses And "Credit Mode - Fagor LA-11 Manuel D'utilisation

EN
The button is displayed in grey as long as no coins have been inserted. Once coins have been
inserted, the picture zone and the price are displayed in brown. When the programme amount has
been inserted, a large "Start" button is displayed in green.
It is still possible to change the programme using the browser buttons. If there is no activity for 15
minutes, the amount inserted is reset, the money is lost and the machine returns to the screen
"Selection 1 – Buttons".
On pressing the "Start" button, the selected programme starts to run.

Coin pulses and "Credit mode"

2.3.
To run any programme, the corresponding payment must first be made. Depending on the existing
self-service configuration, the machine controls the insertion of coins (COIN mode) or receives the
corresponding signal in CP or CR mode via the "coin slot micro" input to allow the selected
programme to run.
While in self-service mode (both on selection screen 1, and screen 2, shown as running a self-
"Credit mode". If the "top open" input is activated, a
it is possible to enter
service programme),
password is requested to enter in "Credit mode".
When the machine enters "Credit mode", it automatically exits self-service mode and behaves as if
it were in normal mode, displaying the information defined on the OPL Main Screen and offering
the option to perform all the actions defined on this screen. The programmes selected for self-
service and the programmes defined for Credit Mode are displayed.
On going to the main menu, all the available options for self-service washing machines are
displayed.
If the "top open" input is deactivated, the machine exits from "Credit mode" automatically. If the
machine is in a secondary screen of the main menu (configuration, maintenance...) and it exits
"Credit Mode", it acts as if it were in this mode until exiting the Main Menu (saving the changes).
Once the machine has reached the Main Screen, it exits credit mode.
Page 34 of 43