NEC MultiSync LCD1980FXi Manuel Utilisateur page 12

Figure C.1
NEC optional product attachment.
Do not use this connector unless specified.
Raise and Lower Monitor Screen
The monitor may be raised or lowered in either Portrait or Landscape mode.
To raise or lower screen, place hands on each side of the monitor and lift or lower to the desired height (Figure RL.1).
NOTE: Handle with care when raising or lowering the monitor screen.
Screen Rotation
Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching with your
fingers.
To raise the screen, place hands on each side of the monitor and lift up to the highest position (Figure RL.1).
To rotate screen, place hands on each side of the monitor screen and turn clockwise from Landscape to Portrait or counter-
clockwise from Portrait to Landscape (Figure R.1).
To rotate OSM menu between landscape and portrait, refer to "Controls" section, "OSM ROTATION" function.
NOTE: If the screen is rotated counterclockwise, the tilt function is not available. Rotate the screen 90° clockwise until you
hear one click.
01_English 4
All manuals and user guides at all-guides.com
INPUT1 INPUT2
Figure RL.1
Figure R.1
English-4
INPUT1 INPUT2
Figure C.2
Vacation
Switch
Figure D.1
10/06/2005, 10:29
Power Button