Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Hot Surface Indicator
An "H" will appear in the heat setting display as long as any
surface cooking area is too hot to touch, even after the surface
cooking area(s) is turned off.
Component Temperature Management
The cooktop regulates the temperature of the internal
components during use. The cooktop automatically reduces the
power of all the elements in use to keep the internal components
from overheating. To resume optimal cooking performance, allow
the cooktop to cool down for 30 minutes.
Dual Zone
The dual elements offer flexibility depending on the size of the
cookware. Single size can be used in the same way as a regular
element. The dual sizes combine single and outer (dual)
elements, and are recommended for larger cookware, large
quantities of food, and home canning.
Dual Element
A
B
A. Single element
B. Dual element
To Use Dual Zone:
1. Select the Left Rear or Right Front surface cooking area.
Touch the Dual Zone key.
All settings and special functions may be used with Dual
Zone.
2. To turn off, touch and hold the "+" (plus) and "-" (minus) keys
for the selected surface cooking area.
Melt + Hold
WARNING
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
Doing so can result in food poisoning or sickness.
The Melt + Hold function can be used on all surface cooking
areas. Melt + Hold can be used on more than 1 surface cooking
area at a time. Use to melt chocolate or butter, or to keep food
warm.
6
All manuals and user guides at all-guides.com
Use only cookware and dishes recommended for oven and
cooktop use, and those that have flat bottoms to make direct
contact with the cooktop surface. Use pot holders or oven mitts
to remove cookware.
Cover all foods with a lid or aluminum foil. Do not use plastic
wrap to cover food, as it may melt onto the cooktop surface.
When warming baked goods, allow a small opening in the cover
for moisture to escape.
Food quality may deteriorate if food is kept on the Melt + Hold
function for an extended period of time. For best results, keep
food warm for no longer than 30 to 45 minutes.
To Use:
1. Select the desired surface cooking area.
2. Touch MELT + HOLD. An indicator light appears on the Melt +
3. To turn off, touch MELT + HOLD or touch the "+" (plus) or "-"
The Boost Level function sets the surface cooking area to a
higher temperature than Power Level 9 for short periods. Water
can be boiled in less time with this function. This function can be
used on all surface cooking areas.
To Use:
1. Select the desired surface cooking area.
2. Touch BOOST LEVEL.
3. To turn off, touch the "-" (minus) key for the selected surface
NOTE: After 10 minutes, the temperature setting will
automatically return to Power Level 9.
The Timer Set function can be used as a timer or can be
programmed to a cook time to turn off a selected surface
cooking area. Cook time can be set for all surface cooking areas.
To Use as a Timer:
1. Touch TIMER SET on the special functions bar.
2. Touch the "+" (plus) or "-" (minus) key on the Timer bar to set
3. Touch TIMER SET to turn off the signal tone
To Use Cook Time:
1. Select the desired surface cooking area.
2. Select the Power Level or Special Function for the selected
3. Touch TIMER SET. The Timer bar flashes.
Hold key.
When Melt + Hold is selected, a clockwise rotation movement
appears on the display next to the selected surface cooking
area.
(minus) key for the selected surface cooking area.
Boost Level
When the Boost Level function is selected, 3 horizontal bars
rotating across the display from bottom to top appear on the
display next to the selected surface cooking area.
cooking area, or touch the "+" (plus) and "-" (minus) keys at
the same time.
Timer Set
the time. You can set the timer for up to 99 minutes. When the
set time is reached, a long signal tone sounds until turned off.
surface cooking area.
Publicité
Table des Matières
