Charge The Battery - Metronic CRISTAL 477073 Notice D'utilisation

All manuals and user guides at all-guides.com

CHARGE THE BATTERY

Plug the speaker into your computer or USB com-
patible wall charger via the included micro USB
cable. While charging, indicator is red. When
indicator is green, the speaker is fully charged.
EN
NOTE: 4 hours required for full charge.
PAIRING
• Press button for 3 seconds to turn on the
speaker. BT LED flashes in blue. The speaker is
ready to pair.
• On your Bluetooth music device, turn on Blue-
tooth and scan for devices in its Bluetooth menu.
• Launch a search (see phone manual if necessary).
When «CRISTAL» appears on the device list of
your device, select «CRISTAL». The BT LED indi-
cator turns solid blue after pairing is established.
The speaker is now ready to play music.
Select this new device to enable synchroniza-
tion and connect. NOTE: With some phones, a
request for Bluetooth synchronization appears.
then confirm with the password (0000).
STEREO PAIRING SETUP (AN ADDITIONAL
SPEAKER IS REQUIRED)
The CRISTAL speaker is equiped with stereo pai-
ring feature. To connect two CRISTAL speakers
together with a true left / right stereo signal:
• Pulsar the button on both speakers for three
seconds to turn them on. The BT LED indicators
blink red.
• Press «L» pairing button from one speaker and
«R» pairing button on the other speaker for three
seconds at the same time.
The BT LED indicator on one speaker turns solid
red once the speakers linked up with each other
and the other speaker keeps blink blue.
32