Publicité
1. Remove two covers(1) and then remove two screws(2) from the top panel.
2. Remove two screws(3) from the rear of the top panel. Remove the top panel from the fridge-freezer.
3. Remove upper hinge(4) and screw(3) from the fridge-freezer.
4. Lift the door and place it on a padded surface to prevent it from being scratched.
5. Remove the foot(9). Remove the screws(8) that hold the lower hinge(6/7).
6. Unscrew the screw(11) and remove the foot(10). Then transfer and fix it to the opposite side.
7. Fix the lower hinge(6/7/8/9) to the opposite side.
8. Remove the screws(14) and remove the stopper(12/13), then transfer to the opposite side.
9. Use another upper hinge that provided in the bag and fix it with the screw(3) to the opposite side.
10. Fit the door onto the lower hinge.
11. While holding the door in the closed position, secure the upper hinge on the other side with screws.
- Make sure the door is properly aligned on the appliance before tightening the screws.
12. Fit the top panel by tightening screw and then attach the cover to the top panel.
EN-7
Publicité
