HP LaserJet 1022nw Guide De Démarrage page 23

Procedure for a Windows infrastructure network installation
If you experience problems during the wireless installation process, see the Problem solving
NOTE
section of the HP LaserJet 1022nw Wireless Printer User Guide.
1. Plug the power cord into the printer and then plug the cord into the power outlet.
2. Connect the cable from the network port on the printer to the network hub/router. This
cable connection is temporary. At the end of the installation process, you will disconnect
the cable. The printer will then operate wirelessly. (Use the cable that is packaged with
the printer.)
ENWW Connect the printer to a wireless only network 17