FTE Maximal MAX T220 HD Guide D'installation Rapide page 15

Quick instAllAtion Guide
iMAGe 1
iMAGe 2
steP 2:
outPut Video conFiGurAtion
The HDMI output of receiver will start in 720p mode by
default, This mode should be supported by your TV HDMI
input. Please verify in your TV manual that the HDMI input
supports this video mode. This receiver also supports the
following video modes (By origin / Native TV / 480i / 480p /
576i / 576p / 720p_50 / 720p_60 / 1080i_25 / 1080i_30
/ 1080p_50 / 1080p_60). The scart output only support the
video mode 480i and 576i.
steP 3: BAsic conFiGurAtion oF the
receiVer
The receiver includes an installation assistant that will help
you to setup the different parameters.
When the receiver is turned on at first time (using the button
at the rear panel of the receiver), the next menu is shown
on the TV:
In order to move through the different options of this menu,
please use the keysof the remote control. - Region: select
your country using keys.
- Region: select the language of the menu and other
information of the receiver. To choose between the
different languages, use keys of the remote control.
- Video Resolution: is used to switch the video resolution.
You can press [ ] key to select mode output video.
- Aspect Mode is used for switching the screen aspect ratio
mode. Now we provide below options: 4:3 PS (Pan and
Scan) / 4:3 LB (Letter box)/ 16:9 / AUTO. You can press [
] key to select each mode circularly.
- Antenna Power: Turn off/on +5V power for active
antenna
- Auto Scan: before making an auto scan (press [OK]
button) be sure that the data of the Region option (Image
1) is correct, in other case the search of channels will
be made wrongly. Once the Region option is confirmed,
please press [OK]. ( image 2)
Don't make any action with the receiver until the Auto scan
has finished.
PAG. 4