Table des Matières
Publicité
USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance and contains no user
serviceable parts. Do not try to fix it yourself. Refer it to qualified
service personnel if servicing is needed.
SELF-CLEANING/FLUSHING
Flushing the Iron is advised after every 5 uses to prevent harmful
mineral build-up that can clog the Iron and prevent it from heating
and steaming properly.
1. With the Iron unplugged, position the Temperature Control Dial to
the lowest MIN setting.
2. Turn the Variable Steam Dial to
3. Fill the see-through Water Tank to the MAX Fill Mark.
4. Plug the Iron into a 120V AC outlet and set the Temperature
Control Dial to its highest setting " • • • " Linen. Let the Iron heat
for 2 minutes.
5. Turn the Variable Steam Dial to
6. Place a hand towel over the ironing surface.
7. Hold the Iron horizontally 2 inches above a towel, allowing steam
to flow through the Vents for 1-2 minutes. You may also press the
Blast of Steam Button several times, pausing 5 seconds between
blasts to allow the Iron to reheat.
8. Pass the Iron over a damp cloth to clean the Soleplate.
9. When finished, turn the Temperature Control Dial to the lowest
MIN setting and unplug from outlet. Allow the Iron to cool com-
pletely before cleaning the exterior of the Iron or before storing.
10. Use a cloth to wipe the exterior of the Iron before storing.
NO STEAM.
for Self-Clean setting.
9
Publicité
Table des Matières
