Publicité
Liens rapides
Publicité
Manuels Connexes pour Westinghouse WST5001ZE
Sommaire des Matières pour Westinghouse WST5001ZE
- Page 1 IRON - FULLY FEATURED MODEL WST5001ZE OWNER’S MANUAL...
- Page 2 IMPORTANT SAFEGUARDS When using your flat iron, basic safety precautions should always be followed including the following: 1. Read all instructions. 2. Use iron only for its intended use. 3. To protect against a risk of electric shock, do not immerse the iron in water or other liquids.
- Page 3 ADDITIONAL IMPORTANT SAFEGUARDS CAUTION HOT SURFACES: This appliance generates heat and escap- ing steam during use. Proper precautions must be taken to prevent the risk of burns, fires or other damage to persons or property. 1. All users of this appliance must read and understand this Owner’s Manual before operating or cleaning this appliance.
- Page 4 GETTING TO KNOW YOUR WESTINGHOUSE WST5001ZE IRON - FULLY FEATURED PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATION. FIGURE 1 1. Burst of Steam Button 8. Maximum Water Level 2. Spray Button 9. Temperature Control 3. Variable Steam 10. Green Auto Shut-Off Light 4.
- Page 5 GETTING TO KNOW YOUR WESTINGHOUSE WST5001ZE IRON - FULLY FEATURED (Cont.) Water Spray Nozzle Fill Cover No Steam Max Steam FIGURE 3 Burst Spray Fabric Temperature of Steam Button Synthetic Button Nylon/Silk/ Medium Polyester Wool/Cotton Medium High Linen High FIGURE 2...
- Page 6 GETTING TO KNOW YOUR WESTINGHOUSE WST5001ZE IRON - FULLY FEATURED (Cont.) PATENTED AUTOMATIC SAFETY SHUT-OFF This iron has two kinds of safety shut-off mechanisms. One is a patent- ed, touch-sensitive “brain” in the handle which turns the iron on or off when it is in the horizontal position.
- Page 7 GETTING TO KNOW YOUR WESTINGHOUSE WST5001ZE IRON - FULLY FEATURED (Cont.) AUTO OFF/ON When the iron is on, the green Auto Shut-Off Light will come on. When the iron is off, the green Auto Shut-Off Light will go off. FIGURE 5...
- Page 8 OPERATING INSTRUCTIONS USING AS A DRY IRON The iron can be used on the dry setting with or without water in the Water Tank. However, it is best to avoid having the Water Tank too full of water while dry ironing. 1.
- Page 9 OPERATING INSTRUCTIONS (Cont.) FILLING THE WATER TANK Fill the water tank with tap water or distilled water. Do not use chemi- cally descaled water or any other liquids. 1. Unplug and allow the iron to cool before filling. 2. Move the Variable Steam to no steam setting. 3.
- Page 10 OPERATING INSTRUCTIONS (Cont.) BURST OF STEAM For a penetrating burst of steam to iron faster and to smooth difficult wrinkles, firmly press the Burst of Steam Button (see FIGURE 9). The red Power On/Heating Light must be on for best results. Do not press the Burst of Steam FIGURE 9 Button more than three times successively.
- Page 11 OPERATING INSTRUCTIONS (Cont.) USING THE VERTICAL STEAM FUNCTION (Cont.) 5. Move the Temperature Control and Variable Steam to desired setting. 6. Allow approximately 45 seconds for the iron to reach the desired temperature. The red Power On/Heating Light will turn off. 7.
- Page 12 OPERATING INSTRUCTIONS (Cont.) FLUSHING (Cont.) 4. The red Power On/Heating Light will turn off when the iron has reached the desired setting. 5. Wait for one more cycle, the red Power On/Heating Light will cycle on and back off again. 6.
- Page 13 NOTES...
- Page 14 WESTINGHOUSE™, and “YOU CAN BE SURE...IF IT’S WESTINGHOUSE™” are trademarks of WESTINGHOUSE ELECTRIC CORPORATION and used under license by Salton, Inc. In no event shall Salton be liable for any incidental or consequential damages, losses or expenses.