User Maintenance Instructions; Care And Cleaning - Westinghouse WST5000ZE Manuel Du Propriétaire

Table des Matières

Publicité

USER MAINTENANCE INSTRUCTIONS

This appliance requires little maintenance and contains no user service-
able parts. Do not try to fix it yourself. Refer it to a qualified repair tech-
nician if servicing is needed.
CAUTION: Always allow Iron to cool completely before
cleaning.

CARE AND CLEANING:

1. Turn Steam Dial to "OFF".
2. Turn Temperature Dial to "MIN".
3. Unplug Iron from electrical outlet.
4. With Soleplate facing away from you, lift Water Fill Port Cover and
carefully turn Iron upside down over a sink. Let remaining water
empty out. Shake Iron gently to remove all water from Reservoir.
Close Water Fill Port Cover.
CAUTION: Water in Reservoir may still be hot. Avoid con-
tact with skin.
5. Wipe the Soleplate with a damp, soft cloth after each use.
CAUTION: Never use scouring pads, abrasives or chemical
cleaners or solvents to clean your coated Soleplate or exte-
rior of the Iron, as these will scratch and/or damage the
surface.
6. Set Iron on its Heel Rest and allow any remaining moisture to
evaporate.
7. Wrap cord around the heel rest. Store the Iron on the Heel Rest, not
on the Soleplate. If the Iron is stored soleplate down, even the small-
est amount of moisture will cause corrosion and staining of the
Soleplate.
11

Publicité

Table des Matières
loading

Table des Matières