Before Using For The First Time; For Best Results - Westinghouse WST5002ZE Manuel Du Propriétaire

BEFORE USING FOR THE FIRST TIME

Carefully unpack your Iron and remove all packaging materials and
any adhesive stickers from the Soleplate. Make sure all adhesive is
removed by rubbing Soleplate with a damp cloth. To remove any dust
that may have accumulated on the Iron during packaging, simply wipe
with a clean, damp cloth. Do not use abrasive cleansers. Do not put the
Iron, cord or plug in water.
NOTE: Before you use your Iron for the first time, you should
flush the Soleplate steam vents to ensure that no stain is
transferred onto fabric from residue possibly left in the vents
from the manufacturing process. To do this, see SELF-CLEANING/
FLUSHING section for detailed instructions.
OPERATING INSTRUCTIONS
FABRIC CHART
NO STEAM
STEAM

FOR BEST RESULTS

1. Check garment labels for the temperature and steam setting
recommended by the fabric manufacturer.
2. To prevent damaging garments from too hot of an Iron, it is best
to first iron garments that require a low temperature. If you should
need to switch from a high setting to a lower temperature, for
example, " • • • " to " • ", allow the Iron about 5 minutes to
reach the lower temperature.
Fabric
Acrylic
Acetate
Silk
Nylon
Rayon
Wool
Polyester
Cotton
Triacetate
Linen
5
Setting
ACRYLIC
SILK
RAYON
WOOL
COTTON
LINEN