Westinghouse WST5002ZE Manuel Du Propriétaire page 10

USER MAINTENANCE INSTRUCTIONS
(Cont.)
TO CLEAN SOLEPLATE
The Iron should be fully cooled before Soleplate cleaning begins. Make
sure the Iron is unplugged before cleaning. Empty the Water Tank of
any remaining water. Apply a small amount of mild cleaner to a damp
cloth. Gently rub Soleplate, then wipe with a moist cloth. NEVER USE
scouring pads or abrasive cleaners on the Soleplate, as this may scratch
the surface.
Wipe all other surfaces with a slightly damp cloth. Never allow water or
any other liquid to get into the unit, except when filling the Water Tank.
NEVER put any chemical cleaning agents or solvents in the Water Tank.
BEFORE USING AGAIN, preheat and move Iron over an old cloth
several times to remove any residue from the Soleplate.
CLEANING THE STEAM VALVE
The variable steam dial/valve is removable to clean build-up scale
which can result in poor steam performance. Cleaning of the steam
valve is only necessary if you notice a reduction in steam performance.
Always disconnect from electrical outlet when cleaning the
steam valve.
TO REMOVE STEAM VALVE
1. Empty the water tank and let the Iron
cool down. Place the Iron on the
Soleplate.
2. Firmly turn the STEAM dial counter-
clockwise to the
up.
3. Pull up to remove steam valve fully.
Wipe tip gently to clean.
4. To replace: Align
indicator arrow. Push down and turn
clockwise.
CAUTION: Do not pour water into the steam valve hole.
icon. It will pop
with the
10