PULOX PO-100 Mode D'emploi page 84

1
10
100
For transmitters rated at a maximum output power not listed above, the
recommended separation distanced in meters (m) can be estimated using
the equation applicable to the frequency of the transmitter, where P is the
maximum output power rating of the transmitter in watts (W) according to
the transmitter manufacturer.
NOTE 1 At 80MHz and 800MHz, the separation distance for the higher
frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic
propagation is affected by absorption and reflection from structures, objects
and people.
0.58
1.83
5.8
0.35
1.10
3.5
0.7
2.21
7