PULOX PO-100 Mode D'emploi page 81

Power
frequency
(50Hz)
magnetic field
IEC 61000-4-8
Guidance and manufacture's declaration-electromagnetic immunity
for EQUIPMENT and SYSTEMS that are not LIFE-SUPPORTING
Guidance and manufacture's declaration-electromagnetic immunity
The Pulse Oximeter is intended for use in the electromagnetic environment
specified below. The customer or the user of Pulse Oximeter should assure
that it is used in such an environment.
Immunity
test
Conducted
RF
IEC 61000-
4-6
Radiated
RF
IEC 61000-
4-3
30A/m
IEC60601 test
level
3V(0.15MHz–
80MHz),6V(in
ISM bands
between
0.15MHz and
80MHz)
10V/m
80MHz to
2.7GHz
30A/m
Compliance
level
3V(0.15MHz–
80MHz),6V(in
ISM bands
between
0.15MHz and
80MHz)
10V/m
should be at least
30%. The
manufacturer may
recommend the ESD
precautionary
procedures to user.
Power frequency
magnetic fields
should be at levels
characteristic of a
typical location in a
typical commercial or
hospital environment
Electromagnetic
environment -
guidance
Portable and mobile RF
communication
equipment should be
used no closer to any
part of the Pulse
Oximeter, including
cables, than the
recommended
separation distance
calculated from the
equation applicable to
the frequency of the
transmitter.
Recommended