PULOX PO-100 Mode D'emploi page 22

1.1 Features
A. Easy to use.
B. Small in volume, light in weight, convenient to carry.
C. Low power consumption.
1.2 Applied range
The Pulse Oximeter can be used to measure human Hemoglobin Saturation
and pulse rate through finger, and indicate the pulse intensity by the bar-
display. The product is suitable for use in family, hospital (Ordinary
sickroom), Oxygen Bar, social medical organizations and also the measure of
saturation oxygen and pulse rate.
1.3 Environment Requirements
Storage Environment
a. Temperature : -40°C ~ +60°C
b. Relative humidity : ≤95%
c. Atmospheric pressure : 500hPa ~ 1060hPa
Operating Environment
a. Temperature: +10°C ~ +40°C
b. Relative Humidity : ≤75%
c. Atmospheric pressure: 700hPa ~ 1060hPa
1.4 Precautions
1.4.1 Attention
Point out conditions or practices that may cause damage to the device or
other properties.
 Before using the device, make sure that it locates in normal working
state and operating environment.
 In order to get a more accurate measurement, it should be used in a
quiet and comfortable environment.
 When it is carried from cold environment to warm or humid
environment, please do not use it immediately.
 If the device is splashed or coagulated by water, please stop operating.
 DO NOT operate the device with sharp things.
 High temperature, high pressure, gas sterilizing or immersion
disinfection for the device is not permitted. Refer to User Manual in the
relative chapter (6.1) for cleaning and disinfection..Please take out the
internal battery before cleaning and disinfection.
 The device is suitable for children and adult.
 The device may not be suitable for all users, if you can't get a satisfactory
EN