Advanced Settings - Stealth Cam STC-PXV26 Manuel D'instruction

Advanced Settings

SET DATE: This setting is used by the camera
to display the correct date on the Info Bar of the
image.
SET TIME: This setting is used by the camera
to display the correct time on the Info Bar of the
image.
TIME ZONE This setting allows you to set your
camera to different time zones.
OPTIONS: Eastern | Central | Mountain |
Pacific | Alaskan | Hawaiian
TIME FORMAT: This setting is used by the camera
to change the display format for the time in the Info
Bar of the image.
OPTIONS: 12 hr | 24 hr
NOTE: If 24 hour format is selected, previous SET
TIME will be adjusted and AM/PM will be removed.
CAMERA NAME: This setting will allow you to
customize the name of your camera.
TEMPERATURE UNIT: This setting is used to
change temperature format on Info Bar.
OPTIONS: Farhenheit | Celsius
INFORMATION BAR: This setting is used to
tell the camera whether the Info Bar should be
displayed at the bottom of images or video.
OPTIONS: On | Off
SW UPGRADE: This option will allow you to
update your camera software if update files are
present on SD card. If files are not present, setting
simply shows current software version.
OPTIONS: Yes | No
FACTORY RESET: This option will reset the
camera to its factory defaults. This will erase any
camera setup present.
OPTIONS: Yes | No
FORMAT MEMORY CARD: This setting is used to
format the SD memory card installed. Formatting
your SD card will ERASE ALL DATA PRESENT. To
format card, change setting to Yes and press Enter.
NOTE: After card is formatted it is impossible to
restore data that was present on card.
LANGUAGE: This feature allows you to select
display language for the menu.
Page 12