Gateway MT6704h Guide De Référence Du Matériel page 57

All manuals and user guides at all-guides.com
3
Plug the other end of the VGA cable into the monitor
port
4
Turn on your notebook.
5
Plug the projector's or monitor's power cord into an
AC power source and turn it on.
Windows recognizes the new hardware and the New
Display Detected dialog box opens.
6
Select the options for the projector or monitor, then click
OK.
7
Press F
the LCD panel, viewing the display on the projector or
monitor, and viewing the display on both the LCD panel
and the projector or monitor.
your notebook may turn off the LCD panel, but will not enter Sleep mode.
Adjusting the display properties
If the image on the projector or monitor does not appear
correctly, or if you want to use the display as an extension of
your notebook desktop, you should adjust the display
properties.
www.gateway.com
on your notebook.
+F4 to switch between viewing the display on
N
Important
If a monitor or projector is connected and you close the LCD panel,
51