Gateway MT6704h Guide De Référence Du Matériel page 49

All manuals and user guides at all-guides.com
Using a CD or DVD drive
[
Important
Prerecorded DVDs and DVD drives contain regional codes that help control
DVD title exports and help reduce illegal disc distribution. To be able to play a
prerecorded DVD, the disc's regional code and your DVD drive's regional code
must match.
The regional code on your DVD drive is determined by your notebook's delivery
address. The regional code for the United States and Canada is 1. The regional
code for Mexico is 4. Your DVD drive's regional code must match the regional code
of the disc. The regional code for the disc is on the disc, disc documentation, or
packaging.
Important
When you place a single-sided disc in the tray, make sure that the label
side is facing up. If the disc has two playable sides, place the disc so the name
of the side you want to play is facing up.
Tip
For information about cleaning a CD or DVD, see
on page 77.
To insert a CD or DVD:
1
Press the eject button on the CD or DVD drive. After the
tray opens slightly, pull the disc tray completely open.
2
Place the disc in the tray with the label facing up, then
press down carefully on the disc until it snaps into place.
3
Push the tray in until it is closed.
To remove a CD or DVD:
1
Press the eject button on the CD or DVD drive. After the
tray opens slightly, pull the disc tray completely open.
2
Carefully lift on the edges of the disc until it snaps off
of the spindle.
3
Push the tray in until it is closed.
Tip
Your notebook must be turned on to remove CDs and DVDs using this
method. If you do not want to turn on your notebook, manually eject the disc
by inserting an opened paper clip into the manual eject hole.
www.gateway.com
Manual eject hole
Eject button
"Cleaning CDs or DVDs"
43