Gateway MT6704h Guide De Référence Du Matériel page 121

All manuals and user guides at all-guides.com
•
See the documentation that came with your modem for
additional troubleshooting information.
Modem (dial-up)
Your modem does not dial or does not connect
•
Make sure that the modem cable is plugged into the
modem jack and not the Ethernet network jack. For the
location of your modem jack, see
•
Make sure that your notebook is connected to the
telephone line and the telephone line has a dial tone.
•
Make sure that the modem cable is less than 6 feet
(1.8 meters) long.
•
Remove any line splitters or surge protectors from your
telephone line, then check for a dial tone by plugging a
working telephone into the telephone wall jack.
•
If you have additional telephone services such as call
waiting, call messaging, or voice mail, make sure that all
messages are cleared and call waiting is disabled before
using the modem. Contact your telephone service to get
the correct code to temporarily disable the service. Also
make sure that the modem dialing properties are set
appropriately.
click Help and Support. Type the keyword dialing in the Search Help
box, then press E
To check the dialing properties:
1
2
3
4
5
6
•
Disconnect any answering machine, fax machine, or
printer that is on the same line as the modem. Do not
connect these devices to the same telephone line as the
modem.
www.gateway.com
Help
For more information about dialing properties, click Start, then
.
NTER
Click (Start), then click Control Panel. The Control
Panel window opens.
Click Hardware and Sound.
Click the Phone and Modem Options. The Phone
and Modem Options dialog box opens.
Click the Dialing Rules tab.
Click the location from which you are dialing, then
click Edit. The Edit Location dialog box opens.
Make sure that all settings are correct.
"Right" on page 8.
115