Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleaning & Replacing Top Pre-Motor Filters
1
Press Tank Release
Button and pull away
from vacuum.
3
Remove
pre-motor
filters from top
of dirt
container lid
by pulling out.
Cleaning & Replacing Bottom Post-Motor Filter
1
Press Tank
Release
Button
and pull
away from
vacuum.
3
Twist filter
counter-clockwise to
unlock and remove
from vacuum.
NOTE: Replace this filter every 3 to 6 months. Visit BISSELL.ca for Model 1650 filter
replacements.
All manuals and user guides at all-guides.com
2
With dirt container
removed, squeeze tabs
and pull up to access
post-motor filter.
4
2
Pull tab out on
front of dirt
container and
pull handle up
to open filter
location.
Both the Pre-Motor Mesh
and Foam filters are
washable.
Clean with mild detergent,
rinse and squeeze all
excess water. Allow filters
to dry completely before
24
reinserting.
h
Place dry pre-motor filters
back in the top of dirt
container placing the thick
foam filter last.
Lift to remove filter.
When reassembling, place
filter back in unit and twist
clockwise to "click" into place.
The pleated filter may NOT be
washed. If dust/debris
accumulates, gently tap the fil-
ter on inside of a trash bin.
www.BISSELL.ca
15
Publicité
Table des Matières
