System Reset - Sangean DPR-77 Mode D'emploi

System reset

If your radio fails to operate correctly, or some digits on the display are missing or incom-
plete carry out the following procedure.
. Press and hold down the Info button for  seconds
2. Repeatedly press the Tuning Up/Down buttons until the display shows "Factory reset",
then press the Select button.
3. If you wish to perform the reset operation, press the Select button one more time. A full
reset of your radio will be performed. All presets and station lists will be erased.
4. After a system reset a scan of the DAB band will be performed. In case of malfunction
due to electrostatic discharge, reset the product (reconnection of power source may be
required) to resume normal operation.
GB
0